BegerCool All Plus for Exterior

Step 1 Surface Preparation

New Surface: 

Completely dry the surface for at least 1 month. Moisture should be less than 14%. 

Old Surface:

Scrub off the old paint and clear fungus and algae on surfaces with Beger Mouldfree M-001. Fill the cracks on the surface with Beger Acrylic Filler F-200.

Caution: 

Before applying your paint, wash the surfaces and remove dust, cement fragment, stain, or oil. 

Step 2 Applying Primer

New Surface:  

Apply BegerCool All Plus Primer #6000 for 1 coat and leave it to dry for at least 2 hours, or apply BegerCool Flex #9000 for 1-2 coats and leave it to dry for at least 3 hours before coating with exterior paint.  

Old Surface:  

Apply Beger Contact Primer B-1700 for 1 coat and leave it to dry for at least 3-4 hours, or apply BegerCool Flex #9000 for 1-2 coats and leave it to dry for at least 3 hours before coating with exterior paint.  

Caution:

Use only clean water or tap water, do not use groundwater or canal water.

Step 3 Painting

Apply BegerCool All Plus for 2 coats. Leave it to dry for at least 2 hours and repeat the process.