BegerCool All Plus Primer #6000

Step 3 Painting

Apply BegerCool All Plus for 2 coats. Leave it to dry for at least 2 hours and repeat the process.

Step 1 Surface Preparation

New Surface:

Leave the surface dry for at least 1 month. Moisture should be less than 14%.

Old Surface:

Scrub old deteriorated surfaces and remove fungi and algae with Beger Mouldfree M-001.

Caution:

Clean or sand the surface with sandpaper to remove all dirt, stain, or dust before painting.

Step 2 Applying Primer

New Surface:  

Apply BegerCool All Plus Primer #5000 or #6000 for 1 coat and leave it to dry for at least 2 hours, or apply BegerCool Flex #9000 for 1-2 coats and leave it to dry for at least 3 hours before painting.  

Old Surface:  

Apply Beger White Contact Primer B-1700 for 1 coat and leave it to dry for at least 3-4 hours, or apply BegerCool Flex #9000 for 1-2 coats and leave it to dry for at least 3 hours before painting.  

Caution: 

Use only clean water or tap water, do not use groundwater or canal water.

Step 3 Painting

Apply BegerCool All Plus for 2 coats. Leave it to dry for at least 2 hours and repeat the process.