BULL Ceiling Paint

Step 3 Ceiling Painting 

Apply 100% acrylic ceiling paint for 2 coats then leave each layer to dry completely for 2 hours before applying the next layer.

Step 1 Surface Preparation 

New Ceiling: 

Completely dry the surface for at least 1 month. Moisture should be less than 14%. Then, clean and remove dust and stain on the surface.  

Old Ceiling: 

All paint film problems should be removed and cleaned before painting.    

• For peeling, fading, blistering, powdery, and chalking surfaces, scrub old paint films and clean the surface.
• For fungus and algae, clean the surface, apply Beger Mould Free M-001 for 1 coat, and leave it to dry for 1 day without washing.
• For the crack width maximum of 1mm., apply Beger Acrylic Filler F-200.
• For the crack with 2-10 mm., apply Beger Acrylic Sealant F-001.

Step 2 Priming 

New Ceiling:

Completely dry the surface for at least 1 month. Moisture should be less than 14%. Apply BULL alkali-resistant primer KP300 and leave it to dry for at least 2-3 hours before applying ceiling paint.  

Old Ceiling:

Apply BULL primer for old ceiling KP100 for 1 coat and leave to dry for at least 8-16 hours, or Apply BULL primer 2IN1 for 1 coat and leave it to dry for at least 1-2 hours before applying ceiling paint.

Step 3 Ceiling Painting 

Apply 100% acrylic ceiling paint for 2 coats then leave each layer to dry completely for 2 hours before applying the next layer.